shark ii iphone case

SKU: EN-X10590

shark ii iphone case

shark ii iphone case

Surroundings: A wireless signal works best outdoors in an open environment. Since it's not possible to have that indoors, you can improve the signal a great deal by making sure the immediate surroundings of the router/modem are clear, especially in the directions you want the signal to reach. This means you don't want to leave the router in a closet, or put it between a big TV and a wall. The best place to leave the router is in midair, but since that's quite hard to do, the second best thing is to put it on the surface of a desk, or mount it on the wall when applicable. Generally, all physical objects, such as walls, glass doors and so on, weaken Wi-Fi signals, some more than others.

Though this might be common, stashing your router/access point in a close corner and in the middle of other electronics such as this reduces its range a great deal, Antenna positioning: With a router that comes with external antennas, you can slightly tweak the above-mentioned globe of coverage, Generally you want the antennas oriented vertically if you want the signal to go wide (which is the most popular usage), If want the signal to go deep into the basement and up to the top floor, set the antennas to a more horizontal angle, Note shark ii iphone case that this only works relatively, and with some routers, you might not experience any difference at all regardless of which way you set its antennas..

Now, if you have placed your router properly and still don't find enough improvement, it's time to check the equipment. Get ready to spend some money. Router: Ideally you just want to have one wireless broadcaster at home, and for most homes a single router is good enough. That said, if you have a small house and the router (put in the middle) can't cover every corner, it's time to consider replacing it. I'd recommend one from these lists. Many wireless routers can also function as an access point. In this case its WAN port is used like a LAN port.

Access point: A separate access point is an ideal solution for a large and sprawling home, one in which you can't place the router in its center, or one with a deep basement, with an existing router, Basically, you want to put the second access point in a location where the signal of the existing router can't reach or gets really weak, In a typical example of this setup, you would have shark ii iphone case the main router in the living room and the second access point in the basement, Now the trick is to connect the access point to the router, Ideally, you should run a network cable from the router to the access point (you'll connect the access point's LAN port to one of the router's LAN ports), If this is too much of a job, you can resort to power-line networking..

Note: Many routers can also work as an access point and will indicate this in its list of features. In this case, the router's WAN port will work as a LAN port. In fact, for the secondary access point scenario, it's best to use two identical routers; one as the main and the second as an access point for the far side of the house. This way you don't have to learn about two different devices. Power line: A power-line adapter basically turns your home's electrical wiring into network cables; this is more clearly explained in Part 1. In the case of the separate access point scenario above, you can use a pair of power-line adapters, such as the D-Link DHP-510AV. Connect one of the adapters to the router and the other to the access point, using network cables. After that, if you want to make your home network seamless, name the Wi-Fi network (or SSID) of the access point the same as that of the existing router. In this case, make sure you use the same security settings (encryption key, method and so on). Or you can also keep them as two separate Wi-Fi networks for easy management.